Stainless Steel Sink Manufacturers Share How To Install The Sin

  • Although the stainless steel sink decoration material is not very eye-catching, the role of the stainless steel sink in the kitchen is not small. If the installation of the stainless steel sink is not in place, it will bring a lot of trouble and affect the home life. The Stainless Steel Sink Manufacturers below introduces the installation method of the stainless steel sink.

    1, stainless steel sink preparation before installation

    The installation of the stainless steel sink is usually installed after the countertop is installed. That is to say, the installation of the sink is done a few days before the completion of the renovation, mainly to avoid certain damage after installation.

    First, open the package, remove the sink body and drain assembly, and check that the accessories are correct and complete. Remove the sink and follow the opening template in the box to make the opening of the countertop. Check if the muffler block is degummed. If it is, please re-apply it. Check whether the faucet is cracked, whether the seals at both ends of the connecting pipe are missing, misplaced, damaged, etc., so as to avoid water leakage after installation.

    2, stainless steel sink installation

    The drain of the sink must be left in the sink cabinet, and the angle valve should be installed before installing the sink. In order to avoid damage to the outer surface of the faucet during the installation of the faucet, the faucet sleeve or faucet plastic bag should be placed on the faucet to install the faucet.

    When connecting the hot and cold water pipes, facing the faucet, the left end is connected to the hot water pipe, and the right end is connected to the cold water pipe. When installing the bellows or braided tube, be sure to pay attention to the tightening force. If it is too large, it will easily damage the thread. If it is too small, it may leak due to the seal.

    1. After the installation of the stainless steel sink is completed, do the water debugging.

    Regarding the opening size of the stainless steel sink, the opening size of the stainless steel sink is generally 2 cm-2.5 cm in length and width of the outer diameter of the sink, and the angle R of the opening of the stainless steel sink is important. Finally, if the two slots are installed, it is recommended that you use the two sinks alternately to ensure that the sink is not blocked or leaking.