Stainless Steel Bathroom Cabinet Installation Steps

  • Stainless Steel Bathroom Cabinet installation steps:

    (1) Confirm the installation position of the bathroom cabinet: Before laying the floor tiles and wall tiles, it is necessary to confirm the installation position of the bathroom cabinet. Since the bathroom cabinet is to be perforated in the wall, the water inlet hole and the drainage hole are also required. Once installed, generally can not move the position, so confirm the installation position of the bathroom cabinet is a prerequisite before installation.

    (2) When purchasing the bathroom cabinet, confirm the shape and size of the bathroom cabinet according to the installation position: after the position of the bathroom cabinet is determined, the shape and size of the bathroom cabinet can only be determined according to the installation position.

    (3) Look at the pipeline diagram of the water pipe and the wiring diagram of the wire: When installing, use the air drill to punch holes in the wall, so it is important to confirm the pipeline diagram and circuit diagram before installation. If you break the water pipe or wire route diagram Partial wall tiles are opened, causing unnecessary losses.

    (4) Confirm the installation height of the bathroom cabinet: The standard installation height of the general bathroom cabinet is 80~85cm, which is calculated from the floor tile to the upper part of the wash basin. The specific installation height is also based on the height and usage habits of the family members. Ok, but it is the most appropriate within the standard height range.

    (5) The accessories and installation of each bathroom cabinet are different, that is, the punching size of the same model is not the same, but the installation process is basically the same. The installation method of the wall-mounted bathroom cabinet is a little different, and the others are basically the same. The difference between the wall-mounted bathroom cabinet and the floor-standing bathroom cabinet is: after assembling the main cabinet, it is necessary to confirm the height of the hanging piece of the main cabinet on the wall. The specific algorithm is: standard installation size (80~85cm) minus Hang the piece to the height of the upper edge of the basin.